NEW PRO

Angle seat Valve
Pneumatic angle seat valve is normally used as pipeline switch in automatic control system. It's widely used in print, dyeing, bleaching, food, detergent, chemicals, water treatment, medicine and other kinds of automatic machinery equipment, characterized by no water attacking, no noise, good sealing etc.
Size:1/2"-2.5",DN10-DN65
Material:CF8、CF8M
connection:thread/clamp/flange,BSP/BSTP/NPT,DIN,Inch
pneumatic operation:Can be configured to position sensor / valve locator (process controller)
Diaphragm valves,3-way,direct way tank bottom valve
Diaphragm valve, manual or pneumatic operation, specifically used in the pharmaceutical industry, health and aseptic processes. The valve is suitable for fluid control and on / off task
Size: 1 / 2 "3 / 4 " 3 / 8 "1 " 1.25 "1.5"2 "2.5"3"
Material: ASTM 304/316L
Connection: clamp / welding / thread / flange, 3A/BPE/DIN/ISO/IDF
Control: smart valve positioner / C-TOP control / position sensor
Seal: PTFE + EPDM (double layer) / EPDM / SILICON / FPM (VITON)
Certification: 3A/54-02 (1580), PED/97/23/EC, FDA.177.2600
Pneumatic Butterfly valves
Butterfly valve, whether manual or automatic operation, can be used in food processing, pharmaceutical and chemical products, industrial fluid applications.
Size DN10 to DN300, 1 / 2 "-12"
Threaded flange connection such as welding clamp
Implementation of the standards DIN SMS RJT 3A ISO IDF
Manual: A number of the handle, lever handle
Pneumatic Operation: normally open normally closed air / gas
Electric operation: switch-based intelligent control
Certification: PED/97/23/EC, health wading license
Intelligent valve positioner / valve process controller
Intelligent Fluid Controller (Valve positioner), mainly used in the fluid process control systems, can actually control the valve flow and valve position feedback. The controller can be installed on variety of pneumatic valves,such as diaphragm valves, reversing valve, angle seat valves, butterfly valves, ball valves, etc.
Features
1) 0 / 4 ... 20mA input to 0 ... 5/10V signal processing (standard)
2) 0 / 4 ... 20mA position feedback output (option)
3) Devivice NET bus protocol control (option)
4) Optional single action / double action function (option)
5) Direct travel / angle travel (option)
Rotary Pump / Centrifugal Pump
Rotory pump: Flow from 1m³/h to 90m³/h,pressure from 1 bar to 12bar.
Centrifugal pump: Flow from 2m³/h to 150m³/h, Head from 12M to 80M, motor power from 0.55kw to 30kw.
Full range of pumps are 3A approval,3A certification No. is 1579.All seals are FDA 177.2600 approval.
BPE FITTINGS
BPE fitting is the best choice for high-clean requirements of phamaceutical engineering.
Size: 1/2"-6"
Material: ASTM316L
Finish: Mechanical or electrical polishing:
15Ra(0.38μm),20Ra(0.51μm),25Ra(0.64μm),30Ra(0.76μm)
Connections: Clamp,Weld
Double seat valves/Mixproof valve
There are two models that the valve chamber outside the self-cleaning and cleaning fluid valve chamber cleaning guidelines.
◎ through the interface between two fluids, this system can be implemented in two body synchronization process, preventing the possibility of contaminated materials.
◎ discharge chamber and a leak detector can improve the system through the valve seat for cleaning.
◎ The mixing valve in the prevention of food processing technology, especially in the beverage, dairy industry applications.
Size DN40-DN100, 1.5 "-4"
Water column to meet the 20bar pressure 10Bar
Material ASTM T304/316L, 1.4301/1.4404
Interface Welding clamp screw, DIN SMS 3A ISO
Sealing material EPDM FPM FDA.177.2600