Overflow Valves
-
Overflow Valve
The safety valve is used to protect the flow pressure safety through pipes, pumps, accessories, pools, etc. With sanitary and safe design, it's avoid operation danger and
equipment failure caused by exceed pressure.With sanitary design and completely material of stainless steel, the valves is the best choice for protection of equipments in diary, food, beverage, pharmaceutical and fine chemical industries.
Max. temperature 120℃ (EPDM) /250。F
Max. operating pressure Spring adjustable (0-3bar/0-6bar/0-10bar)
(0-43,5PSI/0-87PSI/0-145PSI) -
Constant-Pressure Modulating Valve
Pressure regulating valve (breathing valve) is used to maintain and regulate the feed tank with pressure, process, emptying the pressure within the filling stage. When the tank pressure exceeds the preset pressure (such as feed or fermentation), gas pressure relief through the regulator are discharged into the atmosphere in the pressure relief or for gas collection.
When the tank pressure is lower than the default value (such as the emptying process), the gas supply through the valve into the bottom of the tank.
SIZE:DN25-DN50,1”-2”
Material 304/316L -
Vent valve
The vent valve is installed vertically on the suction side of a pump at the top of a tank or at the highest point of an installation in order to release the entrapped air. The valve remains open as long as there is an air flow, but closes as soon as the product reaches the valve to prevent the product from escaping.
size:1"-1.5"
Material ASTM 304/316L, 1.4301/1.4404 -
PRESSURE VACUUM VALVE
PRESSURE VACUUM VALVE
Manual forced opening device for 4” version
SPECIFICATIONS
DIMENSIONS
CLAMP DN 2” and 2”1/2
CLAMP DN 4”
MATERIALS
Valve: stainless steel 316L
Pressure plug: PTFE
Seal: fluorinated elastomer (FKM) - silicon
CONNECTIONS
Clamp
SERVICE CONDITIONS
Max. temperature: +80°C n Min. temperature: 0°C
Vacuum: 30 mbar
Pressure: 0.2 to 2 bar depending on spring