Pneumatic Globe Valve + control unit

Application

Globe valves as an automatic control system of line switch is widely used in printing and weaving, printing and dyeing, bleaching, washing, food, chemical industry, water treatment, pharmaceutical, ect. It has the characteristics of anti water hammer, no noise, reliable sealing performance etc..

 

Design Features

◆Size: 1/2"-3", DN10-DN80
◆Material: CF8/304、CF8M/316
◆Connection : Clamp, thread, flange,BSP、BSP、NPT、DIN
◆Working pressure:8bar(standard)     10bar(Options)
◆Working temperature:120℃(standard)   180℃(Options)
◆Manual:1) plastic handwheel; 2) stainless steel handwheel; 3) fine-tuning the handwheel
◆Pneumatic:1) plastic actuator (standard) 2) stainless steel actuators (option)
◆Pneumatic control mode: positioner, process controller, valve control unit, position sensor

 

Control Unit

●Power supply: DC 24V± 10%
●Single acting (standard), double acting (option)
●Self-adjusting valves feature feedback
●Supports analog signal (4-20mA) & amp; electrical signal (DC24V) Output
●Support for AS-I BUS bus
●Supports manual and automatic operation

  • Pneumatic Globe Valve + control unit
  • Pneumatic Globe Valve + control unit
  • Pneumatic Globe Valve + control unit
online buy
Specification Data Sheet
Document Description Language Size
0.00MB
Manual
Document Description Language Size
0MB
Drawing
Document Description Language Size
0MB