Products

Straight-sampling valve

◆The valve seat opens inside of tank or other equipment that it can avoid opening by accident due to much pressure in the pipes.
◎Operating principle:when turn the hand wheel clockwise, the valve shaft and seal rise up. At this time, valve is open for sampling. When turn the,hand wheel anti-clockwise, the valve shaft and seal go down,at that time, the valve is closed.
◎Temperature:-10℃ -130℃
◎Body material:AISI 304 AISI 316L
◎Seal material:PTFE
◎Connection: clamp, threaded, welded, Nut

Yogurt sampling valve

◆The valve seat opens inside of tank or other equipment that it can avoid opening by accident due to much pressure in the pipes.
◆The valve is normally closed(by spring). The valve is open as soon as pushing the handle and closed when loosing up.
◆The design of completely drainage water is to avoid remains inside the valves. Technical specification
◆Material:316L
◆Temperature:130℃
◆Pressure:10bar

Sampling valve

◎its mainly applied to extract sample from tank or pipeline. It also can be assembled at the bottom of the tank or pipeline to drain away the remains.
◎Operating principle:when turn the hand wheel clockwise, the valve shaft and seal rise up. At this time, valve is open for sampling. When turn the,hand wheel anti-clockwise, the valve shaft and seal go down,at that time, the valve is closed.
◎Applicable temperature:-10℃ -130℃
◎Body material:AISI 304 AISI 316L
◎Seal material:PTFE
◎Connection: clamp, threaded, welded, Nut

level gauge

The level gauge is mainly applied to the tank equipments. The two same gauges or two different gauges are assembled on the tank so that the liquid condition or capacity can be odserved and the sample can be extracted.
◎Size:1/4",3/8",1/2",3/4"
◎Connections: thread, clamp, weld
◎Certificate:PED 97/23/EC,FDA 177.2600