Products

Clamp & Coupling

Specifications: 1/2"-8",DN10-DN200
Material:ASTM304/316L,1.4301/1.4404
Inner surface:Ra0.5μm,mechanical polishing & Electro polishing
outer surface:Ra0.8μm,mechanical polishing
Connection mode : Clamps, welding, thread
Authentication: 3-A-63-03;EN 10204-3.1 Certificate

Pipe Holder

Type: hexagon,round,rubber bush pipe holder
Specifications: 1/2"-8",DN10-DN200
Material:ASTM304/316L,1.4301/1.4404
Connection mode:welding, thread
Applicable Standards:DIN11852/11850、AS1528、SMS、DS、BS4825、ISO、IDF,etc.
Authentication, 3-A-63-03;EN 10204-3.1 Certificate;

Clamp Hose Coupling

Clamp Hose Coupling are used in piping or equipment needed to connect hose assembly
Specifications:1/2"-6",DN10-DN150
Connection mode:Clamps, welding, thread
Standard:DIN Inch
Material:ASTM 304/316L,1.4301/1.4404

Clamp Fittings

Product Type:elbow,tee,reducer,clamp connector,cross
Specifications: 1/2"-8",DN10-DN200
Material:ASTM304/316L,1.4301/1.4404
Inner surface:Ra0.5μm,mechanical polishing & Electro polishin
outer surface:Ra0.8μm,mechanical polishing
Connection mode:Clamps, welding, thread