The pressure type man hole is mainly used for pressure vessel in the fields of Food, wine, beverage,pharmaceutical,etc. ...
◆The whole glass pressure type man hole is mainly used in a variety of food, wine, beverage, pharmaceutical and other in...
The manhole is square shape with open lid,mainly used in food, wine, beverage, pharmaceutical and other industries tank ...
The Square manhole is square shape with open lid,mainly used in food, wine, beverage, pharmaceutical and other industrie...
●The principle is same as micro-filter's. It can prevent the outside particulates coming into the storage tank due to th...
Filter with condensation water mainly applies in the container system Connection size:1"-2.5",DN25-DN65 Filter area: sin...
Micro pore filter can eliminate the particulates and bacteria larger than 0.1um from liquids and gas due to the followin...
The duplex filters applies to purify solids that cannot be seen with the naked eye, such as milk, sugar, soft drinks and...
Filter are widely used in the auxiliary service for food processing, cosmetic, chemicals and pharmacy industries. With h...
●The floor drain is applicable to the food,modified material, pharmaceutica in sanitary and clean workshop. ●Stainless s...
Similar Products:Y-Tee, U-tee, R-tee Wall Thickness:1.2mm,1.5mm,1.65mm,2.0mm,2.8mm Material: ASTM304/316L,1.4301/1.4404 ...
Thermal Insulation Jacket Pipe The design has an insulating jacket shell, in order to achieve the best heat transfer.It ...
High purity stainless steel piping Specifications:1/2"10",DN10-DN250, Wall Thickness:1.2mm,1.5mm,1.65mm,2.0mm,2.8mm Mate...
Product type:elbow,tee,reducer,threaded connector Specifications: 1/2"-8",DN10-DN200 Material:ASTM304/316L,1.4301/1.4404...
Product Type:elbow,tee,reducer,clamp connector,cross Specifications: 1/2"-8",DN10-DN200 Material:ASTM304/316L,1.4301/1.4...
Weld Pipe Fittings Series Product Type:Elbow, Tee, Reducer,Ferrule,Cross Size: 1/2"-8",DN10-DN200 Material:ASTM304/316L,...
I-Line fitting is the ideal choice for industrial of food,brewing, oil and water solution. I-Line fittings can stand hig...
Specifications: 1"-6",DN10-DN150 Material:ASTM304/316L,1.4301/1.4404 Inner surface:Ra0.8μm,mechanical polishing and Elec...
Clamp Hose fitting are used to connect the part by hose in pipeline or some equipment Specifications:1/2"-6",DN10-DN150 ...
Pipe Holder Type: Hexagon,Round,Rubber anti-vibration Specifications: 1/2"-8",DN10-DN200 Material:ASTM304/316L,1.4301/1....
Specifications: 1/2"-8",DN10-DN200 Material:ASTM304/316L,1.4301/1.4404 Specifications: 1/2"-8",DN10-DN200 Material:ASTM3...
The DIN 11864 series Flange and Union are design by sterilization and no dead corner. Same with ASME BPE . It is especi...
Get A Free Quote